Basic/B3a Example

It is equivalent to the B2a example in Geant4 but re-written with a new more Julia friendly interface. See README file for the example.

Load modules

In this example we only need to load the general Geant4 module and the SystemOfUnits one. Please note that not all the units are exported from the SystemOfUnits therefore we explicitly import the ones that ar used in this example. 

using Geant4
using Geant4.SystemOfUnits:  cm, cm3, mm, pGy, eplus, keV, g, eV

Define Detector

We use here a separated file to define the geometry of the detector. It uses the G4 geometry classes, therefore is not too different from the C++ code found in the original example. 

include(joinpath(@__DIR__, "DetectorB3.jl"))

Physics List

We could use already made physics lists such as FTFP_BERT or QGS_BIC, but in this example we construct one by selecting the required physics. This is done by providing a struct type inheriting from the type G4VUserPhysicsList, and in the constructor construct a G4VModularPhysicsList instance add register the needed physics. We do not need to create an instance at this moment, we need just to provide the type to the G4JLApplication, which will instantiate it at the appropriate moment in the initialization sequence. 

struct PhysicsB3a <: G4VUserPhysicsList
    function PhysicsB3a(verbose)
        pl = G4VModularPhysicsList()
        RegisterPhysics(pl, move!(G4DecayPhysics(verbose)))           # Default physics
        RegisterPhysics(pl, move!(G4EmStandardPhysics(verbose)))      # EM physics
        RegisterPhysics(pl, move!(G4RadioactiveDecayPhysics(verbose))) # Radioactive decay
        return pl
    end
end

Primary Particle Generator

In this example the user provides a custom made primary particle generator using the G4ParticleGun class. A custom particle generator consists of three elements:

  • A custom data structure to hold the configuration parameters of the generator. In this case the struct GeneratorB3aData keeps the Z, A, charge, direction, etc. of the ion that will be created.
  • A user function (_init) to initialize the generator called by the toolkit at initialization time. In this case, we crate an instance of G4ParticleGun that will be used later at each event to create the vertex and primary particle.
  • A user function (_gen) that will be called for each event. In this particular case we also do a late initialization of the creation of the ion since it needs to be done after the physics lists is configured.

Both user functions receive the generate data with the configuration parameters as one of the input arguments. The final step is to instantiate an object of the type G4JLPrimaryGenerator with the configuration data and both user functions. Please note that user data has been declared with @with_kw, which provides a constructor with all keywords arguments defaults. See Parameters.jl module for the details. 

@with_kw mutable struct GeneratorB3aData <: G4JLGeneratorData
    gun::Union{Nothing, CxxPtr{G4ParticleGun}} = nothing
    ion::Union{Nothing, CxxPtr{G4ParticleDefinition}} = nothing
    Z::Int64 = 9
    A::Int64 = 18
    ionCharge::Float64 = 0eplus
    excitEnergy::Float64 = 0keV
    position::G4ThreeVector = G4ThreeVector(4cm,4cm,4cm)
    direction::G4ThreeVector = G4ThreeVector(1,0,0)
end
function GeneratorB3a(;kwargs...)
    data = GeneratorB3aData(;kwargs...)
    function _init(data::GeneratorB3aData, ::Any)
        gun = data.gun = move!(G4ParticleGun())
        SetParticleMomentumDirection(gun, G4ThreeVector(1,0,0))
        SetParticleEnergy(gun, 1eV)
    end
    function _gen(evt::G4Event, data::GeneratorB3aData)::Nothing
        if isnothing(data.ion)  # late initialize (after physics processes)
            ion = data.ion = GetIon(data.Z, data.A, data.excitEnergy)
            SetParticleDefinition(data.gun, ion)
            SetParticleCharge(data.gun, data.ionCharge)
        end
        position = data.position + G4ThreeVector((rand()-0.5)*1cm, (rand()-0.5)*1cm, (rand()-0.5)*1cm)
        SetParticlePosition(data.gun, position)
        GeneratePrimaryVertex(data.gun, CxxPtr(evt))
    end
    G4JLPrimaryGenerator("GeneratorB3a", data; init_method=_init, generate_method=_gen)
end
GeneratorB3a (generic function with 1 method)

Define the simulation data structures

The main outcome of the simulation is a custom struct with what the user wants to obtain. This is typically a set of counters, histograms, etc. In this example we want to to collect the number of 'good' events (two crystals with energy deposited >500keV) and the accumulated dose in the 'patient' volume. These are the two members of the struct. In addition, if the user wants to run in MT mode, it needs to provide a add! function to reduce the results that has been obtained by the different worker threads. In this case is very simple, we just need to sum both counters. 

mutable struct SimDataB3a <: G4JLSimulationData
    #---Run data
    goodEvents::Int64
    sumDose::Float64
    SimDataB3a() = new(0,0)
end
function add!(x::SimDataB3a, y::SimDataB3a)
    x.goodEvents += y.goodEvents
    x.sumDose += y.sumDose
end
add! (generic function with 1 method)

Sensitive Detector Crystal

We will collect the energy deposited in the crystals a 'sensitive detector'. This is done, similarly to the way we have created the custom primary particle generator by providing three elements:

  • A custom data structure with what data we want to collect every time a particle enters the 'sensitive detector'. In this case, we want to fill a dictionary with the crystal number and the accumulated deposited energy.
  • A custom function to initialize the data structure, that is called for each event. In this case, the user simply empties the dictionary.
  • A custom function to collect the information that is called for each particle entering the associated volume. In this function, the use navigates the G4 data structures to obtain the required information.

Both functions receive the custom data structure as one of the arguments. The final step is to instance a G4JLSensitiveDetector with the 3 elements. 

struct CrystalData <: G4JLSDData
    edep::Dict{Int64,Float64} # (CopyNo, Edep)
    CrystalData() = new(Dict{Int64,Float64}())
end
function c_initialize(::G4HCofThisEvent, data::CrystalData)::Nothing
    empty!(data.edep)
    return
end
function c_processHits(step::G4Step, ::G4TouchableHistory, data::CrystalData)::Bool
    edep = step |> GetTotalEnergyDeposit
    edep <  0. && return false
    copy = step |> GetPreStepPoint |> GetTouchable |> GetCopyNumber
    data.edep[copy] = haskey(data.edep, copy) ? data.edep[copy] + edep : edep
    return true
end
#---Create SD instance
crystalSD = G4JLSensitiveDetector("CrystalSD", CrystalData();          # SD name an associated data are mandatory
                                   processhits_method=c_processHits,   # process hist method (also mandatory)
                                   initialize_method=c_initialize)     # intialize method

Geant4.G4JLProtoSD{CrystalData}("CrystalSD", CrystalData(Dict{Int64, Float64}()), c_processHits, c_initialize, nothing)

Sensitive Detector Patient

This is similar to the previous one but for the 'patient' volume. In this case we simply sum the dose produced by each particle entering the volume.

mutable struct PatientData <: G4JLSDData
    dose::Float64
    PatientData() = new(0)
end
function p_initialize(::G4HCofThisEvent, data::PatientData)::Nothing
    data.dose = 0
    return
end
function p_processHits(step::G4Step, ::G4TouchableHistory, data::PatientData)::Bool
    edep = step |> GetTotalEnergyDeposit
    edep <  0. && return false
    volume  = step |> GetPreStepPoint |> GetTouchable |> GetSolid |> GetCubicVolume
    density = step |> GetPreStepPoint |> GetMaterial |> GetDensity
    data.dose += edep /(density * volume)
    return true
end
#---Create SD instance
patientSD = G4JLSensitiveDetector("PatientSD", PatientData();           # SD name an associated data are mandatory
                                   processhits_method=p_processHits,    # process hist method (also mandatory)
                                   initialize_method=p_initialize)      # intialize method

Geant4.G4JLProtoSD{PatientData}("PatientSD", PatientData(0.0), p_processHits, p_initialize, nothing)

User Actions

User actions at the proper moment during the execution of the simulation.

  • Run actions: in this example we use the run actions to initialize the simulation data (beginrun) and print the results of the run (endrun). Please note that the end on run action is called by each worker thread, therefore we need to use the master one (thread_id == -1) to accumulate the results of all workers. This is done by calling the defined add! function.
  • Event action: the event action is used to get the data from the sensitive detector structure, which can be accessed with getSDdata(app, "CrystalSD") or getSDdata(app, "PatientSD") with CrystalSD and PatientSD being the names given to the sensitive detectors, and accumulate it in the simulation data.
  • Stacking action: it is used to kill neutrinos that we do not need to track. 
function beginrun(run::G4Run, app::G4JLApplication)::Nothing
    data = getSIMdata(app)
    data.goodEvents = 0
    data.sumDose = 0.
    nothing
end

function endrun(run::G4Run, app::G4JLApplication)::Nothing
    partName = app.generator.data.gun |> GetParticleDefinition |> GetParticleName |> String
    #---end run action is called for each workwer thread and the master one
    if G4Threading!G4GetThreadId() < 0
        data = app.simdata[1]
        #---This is the master thread, so we need to add all the simuation results-----------------
        for d in app.simdata[2:end]
            add!(data, d)
        end
        noEvents = run |> GetNumberOfEvent
        G4JL_println("""
                     --------------------End of Run------------------------------
                      The run was $noEvents $partName Nb of 'good' e+ annihilations: $(data.goodEvents)
                      Total dose in patient : $(data.sumDose/pGy) pGy
                     ------------------------------------------------------------ 
                     """)
    end
end 
#---Event Action
function endevent(evt::G4Event, app::G4JLApplication)
    edep = getSDdata(app, "CrystalSD").edep
    dose = getSDdata(app, "PatientSD").dose
    data = getSIMdata(app)
    if count(>(500keV), values(edep)) == 2
        data.goodEvents += 1
    end
    data.sumDose += dose
    return
end
#---Stacking Action
let G4NeutrinoE, first=true
global function stacking(trk::G4Track, app::G4JLApplication)::G4ClassificationOfNewTrack
    if first  # emulation of C++ static 
        G4NeutrinoE = FindParticle("nu_e")
        first = false
    end
    (trk |> GetParentID) == 0 && return fUrgent               # keep primary particle
    (trk |> GetDefinition) == G4NeutrinoE && return fKill     # kill neutrino
    return fUrgent
end
end
stacking (generic function with 1 method)

Geant4 Application

Finally we create an instance of G4JLApplication with all the defined elements: detector, simulation data, generator, type of the physics list, the user actions and the mapping between sensitive detector and volume in the geometry. 

#---Application------------------------------------------------------------------------------------
app = G4JLApplication(; detector = DetectorB3(),                      # detector with parameters
                        simdata = SimDataB3a(),                       # simulation data structure
                        generator = GeneratorB3a(),                   # primary particle generator
                        nthreads = 0,                                 # # of threads (0 = no MT)
                        physics_type = PhysicsB3a,                    # what physics list to instantiate
                        #evtdisplay =  display,                        # set event display 
                        endeventaction_method = endevent,             # end-event action (fill histograms per event)
                        beginrunaction_method = beginrun,             # begin run action
                        endrunaction_method = endrun,                 # end run action
                        stackaction_method = stacking,                # track classification action
                        sdetectors = ["CrystalLV+" => crystalSD,
                                      "PatientLV" => patientSD]       # mapping of LVs to SDs (+ means multiple LVs with same name)
                      );

configure(app)
initialize(app)
**************************************************************
 Geant4 version Name: geant4-11-02-patch-01 [MT]   (16-February-2024)
                       Copyright : Geant4 Collaboration
                      References : NIM A 506 (2003), 250-303
                                 : IEEE-TNS 53 (2006), 270-278
                                 : NIM A 835 (2016), 186-225
                             WWW : http://geant4.org/
**************************************************************

cryst_mat = CxxPtr{G4Material}(Ptr{G4Material} @0x000000000277a650)
Checking overlaps for volume crystal:0 (G4Box) ... OK! 
Checking overlaps for volume crystal:1 (G4Box) ... OK! 
Checking overlaps for volume crystal:2 (G4Box) ... OK! 
Checking overlaps for volume crystal:3 (G4Box) ... OK! 
Checking overlaps for volume crystal:4 (G4Box) ... OK! 
Checking overlaps for volume crystal:5 (G4Box) ... OK! 
Checking overlaps for volume crystal:6 (G4Box) ... OK! 
Checking overlaps for volume crystal:7 (G4Box) ... OK! 
Checking overlaps for volume crystal:8 (G4Box) ... OK! 
Checking overlaps for volume crystal:9 (G4Box) ... OK! 
Checking overlaps for volume crystal:10 (G4Box) ... OK! 
Checking overlaps for volume crystal:11 (G4Box) ... OK! 
Checking overlaps for volume crystal:12 (G4Box) ... OK! 
Checking overlaps for volume crystal:13 (G4Box) ... OK! 
Checking overlaps for volume crystal:14 (G4Box) ... OK! 
Checking overlaps for volume crystal:15 (G4Box) ... OK! 
Checking overlaps for volume crystal:16 (G4Box) ... OK! 
Checking overlaps for volume crystal:17 (G4Box) ... OK! 
Checking overlaps for volume crystal:18 (G4Box) ... OK! 
Checking overlaps for volume crystal:19 (G4Box) ... OK! 
Checking overlaps for volume crystal:20 (G4Box) ... OK! 
Checking overlaps for volume crystal:21 (G4Box) ... OK! 
Checking overlaps for volume crystal:22 (G4Box) ... OK! 
Checking overlaps for volume crystal:23 (G4Box) ... OK! 
Checking overlaps for volume crystal:24 (G4Box) ... OK! 
Checking overlaps for volume crystal:25 (G4Box) ... OK! 
Checking overlaps for volume crystal:26 (G4Box) ... OK! 
Checking overlaps for volume crystal:27 (G4Box) ... OK! 
Checking overlaps for volume crystal:28 (G4Box) ... OK! 
Checking overlaps for volume crystal:29 (G4Box) ... OK! 
Checking overlaps for volume crystal:30 (G4Box) ... OK! 
Checking overlaps for volume crystal:31 (G4Box) ... OK! 
Checking overlaps for volume ring:0 (G4Tubs) ... OK! 
Checking overlaps for volume ring:1 (G4Tubs) ... OK! 
Checking overlaps for volume ring:2 (G4Tubs) ... OK! 
Checking overlaps for volume ring:3 (G4Tubs) ... OK! 
Checking overlaps for volume ring:4 (G4Tubs) ... OK! 
Checking overlaps for volume ring:5 (G4Tubs) ... OK! 
Checking overlaps for volume ring:6 (G4Tubs) ... OK! 
Checking overlaps for volume ring:7 (G4Tubs) ... OK! 
Checking overlaps for volume ring:8 (G4Tubs) ... OK! 
Checking overlaps for volume Detector:0 (G4Tubs) ... OK! 
Checking overlaps for volume Patient:0 (G4Tubs) ... OK!

Display Detector

In case we want to visualize the detector, the user can trigger the loading of the visualization extension by loading this 3 modules. 

using CairoMakie, Rotations, IGLWrap_jll  # to force loding G4Vis extension

world = GetWorldVolume()
img = draw(world)
display("image/png", img)

png

Execute a run with 10000 events

beamOn(app, 10000)
======================================================================
======          Radioactive Decay Physics Parameters           =======
======================================================================
min MeanLife (from G4NuclideTable)                1 ns 
Max life time (from G4DeexPrecoParameters)        1000 ps 
Internal e- conversion flag                       1
Stored internal conversion coefficients           1
Enabled atomic relaxation mode                    1
Enable correlated gamma emission                  0
Max 2J for sampling of angular correlations       10
Atomic de-excitation enabled                      1
Auger electron emission enabled                   1
Check EM cuts disabled for atomic de-excitation   1
Use Bearden atomic level energies                 0
Use ANSTO fluorescence model                      0
Threshold for very long decay time at rest        1 y  
======================================================================

====================================================================
                  HADRONIC PROCESSES SUMMARY (verbose level 1)
-------------------------------------------------------------------------
                           Hadronic Processes for GenericIon
  Process: Radioactivation
--------------------End of Run------------------------------
 The run was 10000 F18 Nb of 'good' e+ annihilations: 1283
 Total dose in patient : 307.1160127184213 pGy
------------------------------------------------------------