Geant4 Solids

Notebook to exercise all the types of solids defined in Geant4. This is the full list:

G4Box
G4Tubs
G4CutTubs
G4Para
G4Trap
G4Sphere
G4Orb
G4Torus
G4Polycone
G4Polyhedra
G4EllipticalTube
G4Ellipsoid
G4Cons
Booleans

using Geant4
using Geant4.SystemOfUnits
using CairoMakie
using GeometryBasics, Rotations, IGLWrap_jll  # to force loding G4Vis extension

para = G4Para("para", 20,30,30, 0, π/4, π/6)
#drawDistanceToOut(para, 100000)
img = draw(para, wireframe=true)
display("image/png", img)

png

G4Trd

function GeometryBasics.coordinates(trd::G4Trd, facets=6)

x1::Float64 XHalfLength1
x2::Float64 XHalfLength2
y1::Float64 YHalfLength1
y2::Float64 YHalfLength2
z::Float64 ZHalfLength

trd1 = G4Trd("trd1", 10, 5, 10, 5, 5)
img = draw(trd1, wireframe=true, color=:blue)
display("image/png", img)

png

G4Trap

To build a generic trapezoid, the G4Trap class is provided. G4Trap is a solid with six trapezoidal faces, it has two bases parallel to the XY-plane and four lateral faces. The bases are located at the same distance from the XY-plane, but on opposite sides from it. Each of the bases has two edges parallel the X-axis. Let’s call the line joining middle point of these edges - the centre line of the base, and the middle point of this line - the centre of the base. An important property of G4Trap is that the line joining the centres of the bases goes through the origin of the local coordinate system.

parameter	description
z	Half Z length - distance from the origin to the bases
theta	Polar angle of the line joining the centres of the bases at -/+z
phi	Azimuthal angle of the line joining the centre of the base at -pDz to the centre of the base at +z
y1, y2	Half Y length of the base at -z. +z
x1, x2, x3, x4	Half X length at smaller, bigger Y of the base at -z, +z
alpha1, alpha2	Angle between the Y-axis and the centre line of the base at -z. +z

trap = G4Trap("trap", 60, 20deg, 5deg, 40, 30, 40, 10deg, 16, 10, 14, 10deg)
img = draw(trap, wireframe=true, color=:green)
display("image/png", img)

png

G4Sphere

rmin::Float64 inner radius
rmax::Float64 outer radius
ϕ₀::Float64 origin phi angle [0,2π]
Δϕ::Float64 delta phi angle
θ₀::Float64 origin theta angle [0,π]
Δθ::Float64 delta theta angle

sph = G4Sphere("sphere", 7,10, 0, pi/2, pi/4, pi/2 )
img = draw(sph, wireframe=true, color=:gray)
display("image/png", img)

png

G4Orb

Complete sphere

orb = G4Orb("orb", 10)
img = draw(orb, wireframe=false, color=:green)
display("image/png", img)

png

G4Torus

parameter	description
rmin	Inside radius
rmax	Outside radius
rtor	Swept radius of torus
ϕ₀	Starting phi angle in radians ( ϕ₀+Δϕ <= 2π, ϕ₀ > -2π)
Δϕ	Delta angle of the segment in radians

torus = G4Torus("torus", 40, 60, 200, 0, π/2)
img = draw(torus, wireframe=true, color=:blue)
display("image/png", img)

png

img = drawDistanceToOut(torus, 100000)
display("image/png", img)

png

G4Polycone

parameter	description
ϕ₀	Starting phi angle in radians ( ϕ₀+Δϕ <= 2π, ϕ₀ > -2π)
Δϕ	Delta angle of the segment in radians
numZPlanes	Number of Z planes
zPlane	Position of Z planes, with Z in increasing order
rInner	Tangent distance to inner surface
rOuter	Tangent distance to outer surface

pcon = G4Polycone("pcone", π/4, 3π/2, 9,
                  [ 5., 7., 9., 11., 25., 27., 29., 31., 37. ],
                  [ 0., 0., 0., 0., 0., 0., 0., 0., 0. ],
                  [ 0., 10., 10., 5. , 5., 10. , 10. , 2., 2.]
                 )

Geant4.G4PolyconeAllocated(Ptr{Nothing} @0x000000000455a0d0)

img = draw(pcon, wireframe=true, color=:blue)
display("image/png", img)

png

G4Polyhedra

parameter	description
ϕ₀	Starting phi angle in radians ( ϕ₀+Δϕ <= 2π, ϕ₀ > -2π)
Δϕ	Delta angle of the segment in radians
numZPlanes	Number of Z planes
numSides ! Number of sides
zPlane	Position of Z planes, with Z in increasing order
rInner	Tangent distance to inner surface
rOuter	Tangent distance to outer surface

pgon = G4Polyhedra("pgon", -π/4, 5π/4, 3, 7,
                  [ 0., 5., 8., 13. , 30., 32., 35. ],
                  [ 0., 0., 0., 0., 0., 0., 0. ],
                  [ 0., 15., 15., 4., 4., 10., 10.])
img = draw(pgon, wireframe=true, color=:blue)
display("image/png", img)

png

G4EllipticalTube

A tube with an elliptical cross section with elliptical semi-major and semi-minor axes along the X and Y cartesian axes.

parameter	description
xSemiAxis	Half length of axis along X
ySemiAxis	Half length of axis along Y
Dz	Half length Z

etub = G4EllipticalTube("etube", 5., 10., 20.)
img = draw(etub, wireframe=true, color=:green)
display("image/png", img)

png

G4Ellipsoid

The general ellipsoid with possible cut in Z

parameter	description
xSemiAxis	Half length of axis along X
ySemiAxis	Half length of axis along Y
zSemiAxis	Semiaxis in Z
zBottomCut	lower cut plane level, Z
zTopCut	upper cut plane level, Z

ellip = G4Ellipsoid("ellip", 10., 20., 50., -10., 40.)
img = draw(ellip, wireframe=true, color=:green)
display("image/png", img)

png

G4SubtractionSolid

box1 = G4Box("box1", 10,10,10)
tub1 = G4Tubs("tub1",0,7,11,0,2π)
sub1 = G4SubtractionSolid("sub1", CxxPtr(box1), CxxPtr(tub1))
img = draw(sub1, wireframe=true, color=:green)
!isnothing(img) && display("image/png", img)

png

img = drawDistanceToOut(sub1, 100000)
display("image/png", img)

png

G4IntersectionSolid

box1 = G4Box("box1", 10,10,10)
t1 = G4Transform3D(G4RotationMatrix(π/4,0,0), G4ThreeVector())
inter1 = G4IntersectionSolid("inter1", CxxPtr(box1), CxxPtr(box1), t1)
img = draw(inter1, wireframe=true, color=:green)
!isnothing(img) && display("image/png", img)

png

img = drawDistanceToOut(inter1, 100000)
display("image/png", img)

png

G4UnionSolid

tub1 = G4Tubs("tub1",0,5,10,0,2π)
t1 = G4Transform3D(G4RotationMatrix(0,π/2,0), G4ThreeVector())
union1 = G4UnionSolid("union1", CxxPtr(tub1), CxxPtr(tub1), t1)
img = draw(union1, wireframe=false, color=:green)
!isnothing(img) && display("image/png", img)

png

img = drawDistanceToOut(union1, 100000)
display("image/png", img)

png